Maxwell Render

Gamma: 2.4
Burn: 0.2 but i'm thinking about decreasing it to 0.1 or 0.05...need some more testing. Of course I don't say that the best setting and everybody must do it...it's my personal taste. Maybe I'm wrong, so it's why i would like to get some comments abouti it.

_________________
Hyltom, Industrial Designer,
Rhino3D 4.0 - Maxwell 1.7.1 ... Q9400 - 4GB RAM

Thomas, is it possible to share the 3dm file? I don't know how to used Studio and how to map there .

_________________
Hyltom, Industrial Designer,
Rhino3D 4.0 - Maxwell 1.7.1 ... Q9400 - 4GB RAM

Hyltom,

Can you open the OBJ in Rhino ? (I put the link up in the first post)
It opens ok here, but let me know if you have problems with the file.


hmm, well it might give you a pleasing result in some scenes, but I can tell you right away that these values do not produce true color linearity.

For example at burn 0.5 (this is as far as my test goes) the correct gamma would be about 2.05 (other gamma values have more deviation). Also, the burn value tents to distort the Vin/Vout curves ... the further down you go the more convex are the curves and there is no gamma that gives correct results.

_________________
"Only the happy can escape the labyrinth, but only those who escape are happy"

Yes I can without any problem but I need to remap everything and set the material...Will be faster if you can provide me you rhino's file (supposing that you did it with rhino). If not forget it, i will try to manage with studio .

_________________
Hyltom, Industrial Designer,
Rhino3D 4.0 - Maxwell 1.7.1 ... Q9400 - 4GB RAM

I have no problem sending you the 3dm ... but I do not understand the issue you are having. For example, here I can open the OBJ in Rhino (in Rhino ... *not* Studio) and save it as 3DM (it is all nurbs) ... then we can adjust UVs or use the McNeel RCM to do the texturing and Rhinoll to apply materials ... all these with the OBJ.

EDIT: Oh I see what you mean .... sorry for the confusion
No I do not have any mappings in Rhino, everything was exported and worked on studio for this scene... so the 3dm file will not be any more help than the OBJ ... again sorry about that

_________________
"Only the happy can escape the labyrinth, but only those who escape are happy"

Hi all,

Here is a test using dispersive dielectric material.
This test was rendered by [yoda]. Thank you [yoda]

_________________
"Only the happy can escape the labyrinth, but only those who escape are happy"

My problem is simple, I need to spend around 30mn to do that. But I'm too busy to do it. I will prefer an already working scene...if not i need to wait this weekend to redo the mapping and the materials. If the scene is ready, i can used it right now without losing anytime on my job.

_________________
Hyltom, Industrial Designer,
Rhino3D 4.0 - Maxwell 1.7.1 ... Q9400 - 4GB RAM

Yes, I kinda figured this ... like 30sec after posting the response.
(See edit above) Sorry for the misunderstanding.

_________________
"Only the happy can escape the labyrinth, but only those who escape are happy"

thank you thomas

_________________
::
Donations revenue 195 Euro in 7 years
::
everything my models (mathe and 3d-scan) not for Commercial use!

That's a great idea Thomas, right now I'm testing some materials and your scene works like a charm!

_________________
Q6600 - 8Gb RAM - Nvidia GTX 470 | Maya 2011 | Rhino 4.0 || A keyboard, a mouse and an old Wacom Graphire

It looks great and I'd like to use it to render some tests but I cannot open anything with Cinema.

The object-file I import is empty. There are no nurbs..... can anyone provide another format or tell me what I do wrong?
I don't want to use the studio, because I'm used to Cinema+PlugIn atm and I'd like to keep using it that way.

_________________
Cinema R14 Studio, MoI 14+2

It's me again, I'm very trouble sometime...

I think there is some problem with the air bubbles of you obj. file. They seems too big and two are coming out of the big sphere. In my file, they are 3.52 mm of diameter. Is it right?

_________________
Hyltom, Industrial Designer,
Rhino3D 4.0 - Maxwell 1.7.1 ... Q9400 - 4GB RAM

a red, shiny, SSS plastic

great scene, i love it

SL 16.65, 9h30, not time to let it cook more :/



http://raguirre.free.fr/mxm/red_shiny_plastic.mxm

thxraph

_________________
just a french in spain
gallery : http://www.maxwellrender.com/forum/viewtopic.php?t=16431

...thanks Thomas, this will be v. usefull.

can anyone please post a 3ds or something similar that I'm able to use it in Cinema?

Or just tell me how to import?

_________________
Cinema R14 Studio, MoI 14+2