Maxwell Render

Maxwell Render Information Repository
It is currently Wed Jun 19, 2013 8:28 am

View unanswered posts | View active topics


Board index » Maxwell Render » Maxwell Resources

All times are UTC + 1 hour [ DST ]



Post new topic Reply to topic  Page 1 of 2
  [ 27 posts ]  Go to page 1, 2  Next
  Print view Previous topic | Next topic 
Author Message
Bubbaloo
 Post subject: Trouble with a material.
PostPosted: Mon Apr 14, 2008 3:05 pm 
User avatar

Joined: Sat Feb 24, 2007 11:50 pm
Posts: 7346
Location: Tulsa, Oklahoma
I created a displacement slate tile material for a scene I'm working on and it is exhibiting some strange behavior in the grout lines.
Here's the trouble:
Image

And here is the isolated fireplace, rendered with sun as the only light source:
Image
Isolated, it works correctly...

I checked the geometry to make sure there were no coincident faces, and the mesh is subdivided to about 2 or 3 inch polygons all over:
Image
Do you think maybe there are some polygons that need to be divided again because they are too rectangular?

Any thoughts on this will be appreciated!

_________________
Brian Looney
Maxwell + RealFlow
http://lunatic-studio.com/
Help! I'm dispersing into a haze of probability!
Top
 Profile  
 
JCAddy
 Post subject:
PostPosted: Mon Apr 14, 2008 8:26 pm 

Joined: Wed Nov 09, 2005 1:26 am
Posts: 1702
Location: California
That material kicks arse!

Can you show a wireframe of the fireplace with everything else turned on in your scene?

_________________
Jason Addy

http://www.jaddyportfolio.com
Top
 Profile  
 
Bubbaloo
 Post subject:
PostPosted: Mon Apr 14, 2008 8:40 pm 
User avatar

Joined: Sat Feb 24, 2007 11:50 pm
Posts: 7346
Location: Tulsa, Oklahoma
Thanks, Jason. Here's the wire:
Image

Any ideas?
What's strange is, it happens on the fireplace, but not the columns which are subdivided the same. I can do some cleanup in PS to correct it, but you know, I shouldn't have to, right? It's a matter of principal... :lol: Or my stubborn-ness.

_________________
Brian Looney
Maxwell + RealFlow
http://lunatic-studio.com/
Help! I'm dispersing into a haze of probability!
Top
 Profile  
 
KurtS
 Post subject:
PostPosted: Mon Apr 14, 2008 10:22 pm 
User avatar

Joined: Thu Apr 20, 2006 7:02 pm
Posts: 1430
Location: outside
try to check "adaptive" in the displacement layer.
Top
 Profile  
 
Bubbaloo
 Post subject:
PostPosted: Tue Apr 15, 2008 12:08 am 
User avatar

Joined: Sat Feb 24, 2007 11:50 pm
Posts: 7346
Location: Tulsa, Oklahoma
KurtS wrote:
try to check "adaptive" in the displacement layer.

Nope, Kurt, that didn't do it. I can't figure it out.

_________________
Brian Looney
Maxwell + RealFlow
http://lunatic-studio.com/
Help! I'm dispersing into a haze of probability!
Top
 Profile  
 
Mihai
 Post subject:
PostPosted: Tue Apr 15, 2008 6:49 am 
User avatar

Joined: Wed Jan 26, 2005 8:30 pm
Posts: 7406
Location: Uzbjeckiazutjenikitzistan
You have interpolation on or off? Show a piece of the displacement texture at 100%, it would help. Also is it 8 bit or 16 bit?

_________________
Next Limit Team
Merchant of happiness
Top
 Profile  
 
Fernando Tella
 Post subject:
PostPosted: Tue Apr 15, 2008 8:55 am 
User avatar

Joined: Wed Apr 13, 2005 4:58 pm
Posts: 3032
Location: Madrid
Could it be some hidden geometry that shows in render? It happened to me once that a copy (or an instance, can't remember now) of an object which was hidden in viewport showed in render no matter what I did.
Is there something hidden in that place?

_________________
http://www.ftella.com
Top
 Profile  
 
Bubbaloo
 Post subject:
PostPosted: Tue Apr 15, 2008 2:45 pm 
User avatar

Joined: Sat Feb 24, 2007 11:50 pm
Posts: 7346
Location: Tulsa, Oklahoma
Mihai wrote:
You have interpolation on or off? Show a piece of the displacement texture at 100%, it would help. Also is it 8 bit or 16 bit?


Here's the full displacement map (16 bit):
http://www.divshare.com/download/4260178-649

Filtering off, smoothing on, height 1cm absolute, offset 1.0, precision 64.

Grout color has it's own weight mapped layer.

I will do a test to see if offset 0.0 helps. I have offset 1.0 because I wanted the whit parts of the displacement map to be the outside edge and the grout lines to sink in 1 cm.

_________________
Brian Looney
Maxwell + RealFlow
http://lunatic-studio.com/
Help! I'm dispersing into a haze of probability!
Top
 Profile  
 
Bubbaloo
 Post subject:
PostPosted: Tue Apr 15, 2008 2:47 pm 
User avatar

Joined: Sat Feb 24, 2007 11:50 pm
Posts: 7346
Location: Tulsa, Oklahoma
Fernando Tella wrote:
Could it be some hidden geometry that shows in render? It happened to me once that a copy (or an instance, can't remember now) of an object which was hidden in viewport showed in render no matter what I did.
Is there something hidden in that place?


That's what I thought, too, but I checked and didn't find anything there.

_________________
Brian Looney
Maxwell + RealFlow
http://lunatic-studio.com/
Help! I'm dispersing into a haze of probability!
Top
 Profile  
 
Mihai
 Post subject:
PostPosted: Tue Apr 15, 2008 5:48 pm 
User avatar

Joined: Wed Jan 26, 2005 8:30 pm
Posts: 7406
Location: Uzbjeckiazutjenikitzistan
Brian since the lines are so thin in the texture, I think you need to increase the precision. Also turning smoothing off might help in this case. When rendering the higher rez, there are very few pixels in the texture to accurately displace the geometry, so perhaps smoothing off might help and since the displacement geometry is flat, smoothing is not needed.

You could also keep the texture at 2048, but have it contain 4 times less tiles (so then make the lines 4 times thicker), then just tile the map 4 times on the geometry.

_________________
Next Limit Team
Merchant of happiness
Top
 Profile  
 
Bubbaloo
 Post subject:
PostPosted: Tue Apr 15, 2008 5:55 pm 
User avatar

Joined: Sat Feb 24, 2007 11:50 pm
Posts: 7346
Location: Tulsa, Oklahoma
Ok, I will try your suggestions. Thanks!

_________________
Brian Looney
Maxwell + RealFlow
http://lunatic-studio.com/
Help! I'm dispersing into a haze of probability!
Top
 Profile  
 
Bubbaloo
 Post subject:
PostPosted: Tue Apr 15, 2008 8:00 pm 
User avatar

Joined: Sat Feb 24, 2007 11:50 pm
Posts: 7346
Location: Tulsa, Oklahoma
Whoopty-doo!

Here's a scene I have been working on today:
Image

What de heck is goin on?

_________________
Brian Looney
Maxwell + RealFlow
http://lunatic-studio.com/
Help! I'm dispersing into a haze of probability!
Top
 Profile  
 
KurtS
 Post subject:
PostPosted: Tue Apr 15, 2008 8:02 pm 
User avatar

Joined: Thu Apr 20, 2006 7:02 pm
Posts: 1430
Location: outside
developing your own style? ;)
Top
 Profile  
 
Bubbaloo
 Post subject:
PostPosted: Tue Apr 15, 2008 8:02 pm 
User avatar

Joined: Sat Feb 24, 2007 11:50 pm
Posts: 7346
Location: Tulsa, Oklahoma
Here's a preview of the material:
Image

_________________
Brian Looney
Maxwell + RealFlow
http://lunatic-studio.com/
Help! I'm dispersing into a haze of probability!
Top
 Profile  
 
Bubbaloo
 Post subject:
PostPosted: Tue Apr 15, 2008 8:03 pm 
User avatar

Joined: Sat Feb 24, 2007 11:50 pm
Posts: 7346
Location: Tulsa, Oklahoma
KurtS wrote:
developing your own style? ;)


Yeah, that's some fancy brickwork, huh...

_________________
Brian Looney
Maxwell + RealFlow
http://lunatic-studio.com/
Help! I'm dispersing into a haze of probability!
Top
 Profile  
 
Display posts from previous:  Sort by  
Post new topic Reply to topic  Page 1 of 2
  [ 27 posts ]  Go to page 1, 2  Next

Board index » Maxwell Render » Maxwell Resources

All times are UTC + 1 hour [ DST ]

You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot post attachments in this forum

Search for:
Jump to:  
Powered by phpBB® Forum Software © phpBB Group